Manual

Simply put, Gabs is a package for creating and transforming Gaussian bosonic systems. This section discusses the "lower level" tools for simulating such phenomena, with mathematical explanations when appropriate. For comprehensive reviews of Gaussian quantum information, see the suggested readings page.

The Symplectic Formalism

The underlying geometry of Gaussian informatics in the phase space is symplectic. From the basic canonical commutation relations (CCRs) of quantized continuous variable systems, manifestations of the symplectic group $\text{Sp}(2N, \mathbb{R})$ appear everywhere. In Gabs, symplectic basis types must be defined from the beginning. Here's how they are laid out in this library:

canonical ordering	symplectic form	basis type
$(\hat{x}_1, \hat{p}_1, \cdots, \hat{x}_N, \hat{p}_N)$	$\begin{pmatrix} 0 & 1 \\ - 1 & 0 \end{pmatrix} \otimes \mathbf{I}_N$	`QuadPairBasis`
$(\hat{x}_1, \cdots, \hat{x}_N, \hat{p}_1, \cdots, \hat{p}_N)$	$\begin{pmatrix} 0 & \mathbf{I}_N \\ -\mathbf{I}_N & 0 \end{pmatrix}$	`QuadBlockBasis`

Each symplectic basis type is wrapped around the number of bosonic modes $N$. We can compose a larger symplectic basis with directsum or ⊕, the direct sum symbol which can be typed in the Julia REPL as \oplus<TAB>:

julia> b = QuadPairBasis(2)
QuadPairBasis(2)

julia> b ⊕ b
QuadPairBasis(4)

Of course, this type of behavior will occur implicitly when we take tensor products of Gaussian states and operators, as discussed in the following sections.

Note

A matrix $\mathbf{S}$ of size $2N\times 2N$ is symplectic when it satisfies the relation $\mathbf{S} \mathbf{\Omega} \mathbf{S}^{\text{T}} = \mathbf{\Omega},$ where $\mathbf{\Omega}$ is an invertible skew-symmetric matrix known as the symplectic form.

Gaussian States

The star of this package is the GaussianState type, which allows us to initialize and manipulate a phase space description of an arbitrary Gaussian state.

Gabs.GaussianState — Type

Defines a Gaussian state for an N-mode bosonic system over a 2N-dimensional phase space.

Fields

basis: Symplectic basis for Gaussian state.
mean: The mean vector of length 2N.
covar: The covariance matrix of size 2N x 2N.
ħ = 2: Reduced Planck's constant.

Example

julia> coherentstate(QuadPairBasis(1), 1.0+im)
GaussianState for 1 mode.
  symplectic basis: QuadPairBasis
mean: 2-element Vector{Float64}:
 2.0
 2.0
covariance: 2×2 Matrix{Float64}:
 1.0  0.0
 0.0  1.0

source

Functions to create instances of elementary Gaussian states are provided as part of the package API. Listed below are supported predefined Gaussian states:

Detailed discussions and mathematical descriptions for each of these states are given in the Gaussian Zoos page.

Note

In Gabs, the default convention $\hbar = 2$ is used for the commutation relation $[\hat{x}, \hat{p}] = i\hbar$. To change this convention, pass a new value to ħ as a keyword argument in any predefined method that creates a Gaussian object. For instance, to change the convention to ħ = 1 for a coherent state, call coherentstate(basis, α, ħ = 1). This is a more performant and safer approach compared to setting a global variable in a package. An error will be thrown for operations between Gaussian objects with different ħ conventions.

Gaussian Unitaries

To transform Gaussian states into Gaussian states, we need Gaussian maps. Let's begin with the simplest Gaussian transformation, a unitary transformation, which can be created with the GaussianUnitary type:

Gabs.GaussianUnitary — Type

Defines a Gaussian unitary for an N-mode bosonic system over a 2N-dimensional phase space.

Fields

basis: Symplectic basis for Gaussian unitary.
disp: The displacement vector of length 2N.
symplectic: The symplectic matrix of size 2N x 2N.
ħ = 2: Reduced Planck's constant.

Mathematical description of a Gaussian unitary

An N-mode Gaussian unitary, is a unitary operator characterized by a displacement vector d of length 2N and symplectic matrix S of size 2N x 2N, such that its action on a Gaussian state results in a Gaussian state. More specifically, a Gaussian unitary transformation on a Gaussian state is described by its maps on the statistical moments x̄ and V of the Gaussian state: x̄ → Sx̄ + d and V → SVSᵀ.

Example

julia> displace(QuadPairBasis(1), 1.0+im)
GaussianUnitary for 1 mode.
  symplectic basis: QuadPairBasis
displacement: 2-element Vector{Float64}:
 2.0
 2.0
symplectic: 2×2 Matrix{Float64}:
 1.0  0.0
 0.0  1.0

source

This is a rather clean way to characterize a large group of Gaussian transformations on an N-mode Gaussian bosonic system. As long as we have a displacement vector of size 2N and symplectic matrix of size 2N x 2N, we can create a Gaussian transformation.

This library has a number of predefined Gaussian unitaries, which are listed below:

Detailed discussions and mathematical descriptions for each of these unitaries are given in the Gaussian Zoos page.

Gaussian Channels

Noisy bosonic channels are an important model for describing the interaction between a Gaussian state and its environment. Similar to Gaussian unitaries, Gaussian channels are linear bosonic channels that map Gaussian states to Gaussian states. Such objects can be created with the GaussianChannel type:

Gabs.GaussianChannel — Type

Defines a Gaussian channel for an N-mode bosonic system over a 2N-dimensional phase space.

Fields

basis: Symplectic representation for Gaussian channel.
disp: The displacement vector of length 2N.
transform: The transformation matrix of size 2N x 2N.
noise: The noise matrix of size 2N x 2N.
ħ = 2: Reduced Planck's constant.

Mathematical description of a Gaussian channel

An N-mode Gaussian channel is an operator characterized by a displacement vector d of length 2N, as well as a transformation matrix T and noise matrix N of size 2N x 2N, such that its action on a Gaussian state results in a Gaussian state. More specifically, a Gaussian channel action on a Gaussian state is described by its maps on the statistical moments x̄ and V of the Gaussian state: x̄ → Tx̄ + d and V → TVTᵀ + N.

Example

julia> noise = [1.0 -3.0; 4.0 2.0];

julia> displace(QuadPairBasis(1), 1.0+im, noise)
GaussianChannel for 1 mode.
  symplectic basis: QuadPairBasis
displacement: 2-element Vector{Float64}:
 2.0
 2.0
transform: 2×2 Matrix{Float64}:
 1.0  0.0
 0.0  1.0
noise: 2×2 Matrix{Float64}:
 1.0  -3.0
 4.0   2.0

source

Listed below are a list of predefined Gaussian channels supported by Gabs:

Note

Any predefined Gaussian unitary method can be called with an additional noise matrix to create a GaussianChannel object. For instance, a noisy displacement operator can be called with displace as follows:

julia> basis = QuadPairBasis(1);

julia> noise = [1.0 -2.0; 4.0 -3.0];

julia> displace(basis, 1.0-im, noise)
GaussianChannel for 1 mode.
  symplectic basis: QuadPairBasis
displacement: 2-element Vector{Float64}:
  2.0
 -2.0
transform: 2×2 Matrix{Float64}:
 1.0  0.0
 0.0  1.0
noise: 2×2 Matrix{Float64}:
 1.0  -2.0
 4.0  -3.0

Actions

Out-of-place actions of Gaussian unitaries and Gaussian channels on Gaussian states are called with *, while in-place ones are called with apply!:

julia> basis = QuadBlockBasis(2); state = vacuumstate(basis);

julia> un = squeeze(basis, 1.0, 2.0)
GaussianUnitary for 2 modes.
  symplectic basis: QuadBlockBasis
displacement: 4-element Vector{Float64}:
 0.0
 0.0
 0.0
 0.0
symplectic: 4×4 Matrix{Float64}:
  2.03214   0.0      -1.06861   0.0
  0.0       2.03214   0.0      -1.06861
 -1.06861   0.0       1.05402   0.0
  0.0      -1.06861   0.0       1.05402

julia> un * state
GaussianState for 2 modes.
  symplectic basis: QuadBlockBasis
mean: 4-element Vector{Float64}:
 0.0
 0.0
 0.0
 0.0
covariance: 4×4 Matrix{Float64}:
  5.2715    0.0      -3.29789   0.0
  0.0       5.2715    0.0      -3.29789
 -3.29789   0.0       2.25289   0.0
  0.0      -3.29789   0.0       2.25289

julia> ch = attenuator(basis, 0.25, 5)
GaussianChannel for 2 modes.
  symplectic basis: QuadBlockBasis
displacement: 4-element Vector{Float64}:
 0.0
 0.0
 0.0
 0.0
transform: 4×4 Matrix{Float64}:
 0.968912  0.0       0.0       0.0
 0.0       0.968912  0.0       0.0
 0.0       0.0       0.968912  0.0
 0.0       0.0       0.0       0.968912
noise: 4×4 Matrix{Float64}:
 0.306044  0.0       0.0       0.0
 0.0       0.306044  0.0       0.0
 0.0       0.0       0.306044  0.0
 0.0       0.0       0.0       0.306044

julia> apply!(state, ch)
GaussianState for 2 modes.
  symplectic basis: QuadBlockBasis
mean: 4-element Vector{Float64}:
 0.0
 0.0
 0.0
 0.0
covariance: 4×4 Matrix{Float64}:
 1.24483  0.0      0.0      0.0
 0.0      1.24483  0.0      0.0
 0.0      0.0      1.24483  0.0
 0.0      0.0      0.0      1.24483

Tensor Products

If we were operating in the state (Fock) space, and wanted to describe multi-mode Gaussian states, we would take the tensor product of multiple density operators. That method, however, is quite computationally expensive and requires a finite truncation of the Fock basis. To create such state vector simulations, we recommend using the QuantumOptics.jl library. For our purposes in the phase space, we efficiently create multi-mode Gaussian systems via direct sum, which corresponds to a tensor product of infinite-dimensional Hilbert spaces. A tensor product of Gaussian states can be called with either tensor or ⊗, the Kronecker product symbol which can be typed in the Julia REPL as \otimes<TAB>. Take the following example, where we produce a 3-mode Gaussian state that consists of a coherent state, vacuumstate, and squeezed state:

julia> basis = QuadPairBasis(1);

julia> coherentstate(basis, -1.0+im) ⊗ vacuumstate(basis) ⊗ squeezedstate(basis, 0.25, pi/4)
GaussianState for 3 modes.
  symplectic basis: QuadPairBasis
mean: 6-element Vector{Float64}:
 -2.0
  2.0
  0.0
  0.0
  0.0
  0.0
covariance: 6×6 Matrix{Float64}:
 1.0  0.0  0.0  0.0   0.0        0.0
 0.0  1.0  0.0  0.0   0.0        0.0
 0.0  0.0  1.0  0.0   0.0        0.0
 0.0  0.0  0.0  1.0   0.0        0.0
 0.0  0.0  0.0  0.0   0.759156  -0.36847
 0.0  0.0  0.0  0.0  -0.36847    1.4961

Note that in the above example, we defined the symplectic basis to be of type QuadPairBasis. If we wanted the canonical field operators to be ordered blockwise, then we would call QuadBlockBasis instead:

julia> basis = QuadBlockBasis(1);

julia> coherentstate(basis, -1.0+im) ⊗ vacuumstate(basis) ⊗ squeezedstate(basis, 0.25, pi/4)
GaussianState for 3 modes.
  symplectic basis: QuadBlockBasis
mean: 6-element Vector{Float64}:
 -2.0
  0.0
  0.0
  2.0
  0.0
  0.0
covariance: 6×6 Matrix{Float64}:
 1.0  0.0   0.0       0.0  0.0   0.0
 0.0  1.0   0.0       0.0  0.0   0.0
 0.0  0.0   0.759156  0.0  0.0  -0.36847
 0.0  0.0   0.0       1.0  0.0   0.0
 0.0  0.0   0.0       0.0  1.0   0.0
 0.0  0.0  -0.36847   0.0  0.0   1.4961

These tensor product methods are also available for Gaussian unitaries and channels:

julia> basis = QuadBlockBasis(1);

julia> squeeze(basis, 2.0, pi/3) ⊗ phaseshift(basis, pi/6)
GaussianUnitary for 2 modes.
  symplectic basis: QuadBlockBasis
displacement: 4-element Vector{Float64}:
 0.0
 0.0
 0.0
 0.0
symplectic: 4×4 Matrix{Float64}:
  1.94877   0.0       -3.14095  0.0
  0.0       0.866025   0.0      0.5
 -3.14095   0.0        5.57563  0.0
  0.0      -0.5        0.0      0.866025

For applying the same predefined operator to a multi-mode system, simply call the operator on the corresponding multi-mode basis. For instance, if we wanted to apply a phase shift of π/4 to a three-mode Gaussian system, then we would create the following operation:

julia> basis = QuadPairBasis(3);

julia> phaseshift(basis, pi/4)
GaussianUnitary for 3 modes.
  symplectic basis: QuadPairBasis
displacement: 6-element Vector{Float64}:
 0.0
 0.0
 0.0
 0.0
 0.0
 0.0
symplectic: 6×6 Matrix{Float64}:
  0.707107  0.707107   0.0       0.0        0.0       0.0
 -0.707107  0.707107   0.0       0.0        0.0       0.0
  0.0       0.0        0.707107  0.707107   0.0       0.0
  0.0       0.0       -0.707107  0.707107   0.0       0.0
  0.0       0.0        0.0       0.0        0.707107  0.707107
  0.0       0.0        0.0       0.0       -0.707107  0.707107

If, instead we wanted to apply phase shifts of π/3, π/4, and π/5 to the respective-modes of a three-mode Gaussian system, then we would dispatch phaseshift on a vector of the phase shifts:

julia> basis = QuadPairBasis(3);

julia> phaseshift(basis, [pi/3, pi/4, pi/5])
GaussianUnitary for 3 modes.
  symplectic basis: QuadPairBasis
displacement: 6-element Vector{Float64}:
 0.0
 0.0
 0.0
 0.0
 0.0
 0.0
symplectic: 6×6 Matrix{Float64}:
  0.5       0.866025   0.0       0.0        0.0       0.0
 -0.866025  0.5        0.0       0.0        0.0       0.0
  0.0       0.0        0.707107  0.707107   0.0       0.0
  0.0       0.0       -0.707107  0.707107   0.0       0.0
  0.0       0.0        0.0       0.0        0.809017  0.587785
  0.0       0.0        0.0       0.0       -0.587785  0.809017

Similar properties hold for Gaussian channels and states. Let's see some examples for multi-mode coherent states:

julia> basis = QuadPairBasis(3);

julia> coherentstate(basis, 1.0-im)
GaussianState for 3 modes.
  symplectic basis: QuadPairBasis
mean: 6-element Vector{Float64}:
  2.0
 -2.0
  2.0
 -2.0
  2.0
 -2.0
covariance: 6×6 Matrix{Float64}:
 1.0  0.0  0.0  0.0  0.0  0.0
 0.0  1.0  0.0  0.0  0.0  0.0
 0.0  0.0  1.0  0.0  0.0  0.0
 0.0  0.0  0.0  1.0  0.0  0.0
 0.0  0.0  0.0  0.0  1.0  0.0
 0.0  0.0  0.0  0.0  0.0  1.0

julia> coherentstate(basis, [1.0-im, 2.0-2.0im, 3.0-3.0im])
GaussianState for 3 modes.
  symplectic basis: QuadPairBasis
mean: 6-element Vector{Float64}:
  2.0
 -2.0
  4.0
 -4.0
  6.0
 -6.0
covariance: 6×6 Matrix{Float64}:
 1.0  0.0  0.0  0.0  0.0  0.0
 0.0  1.0  0.0  0.0  0.0  0.0
 0.0  0.0  1.0  0.0  0.0  0.0
 0.0  0.0  0.0  1.0  0.0  0.0
 0.0  0.0  0.0  0.0  1.0  0.0
 0.0  0.0  0.0  0.0  0.0  1.0

Partial Traces

Partial traces of Gaussian states can be performed with ptrace. For tracing out a single-mode, call an integer corresponding to the mode of choice in a multi-mode Gaussian system. For tracing out several modes, call instead a vector of integers. Let's see some examples:

julia> basis = QuadPairBasis(2);

julia> state = coherentstate(basis, [1.0-im, 2.0-2.0im]) ⊗ eprstate(basis, 2.0, pi/3)
GaussianState for 4 modes.
  symplectic basis: QuadPairBasis
mean: 8-element Vector{Float64}:
  2.0
 -2.0
  4.0
 -4.0
  0.0
  0.0
  0.0
  0.0
covariance: 8×8 Matrix{Float64}:
 1.0  0.0  0.0  0.0    0.0       0.0       0.0       0.0
 0.0  1.0  0.0  0.0    0.0       0.0       0.0       0.0
 0.0  0.0  1.0  0.0    0.0       0.0       0.0       0.0
 0.0  0.0  0.0  1.0    0.0       0.0       0.0       0.0
 0.0  0.0  0.0  0.0   27.3082    0.0     -13.645   -23.6338
 0.0  0.0  0.0  0.0    0.0      27.3082  -23.6338   13.645
 0.0  0.0  0.0  0.0  -13.645   -23.6338   27.3082    0.0
 0.0  0.0  0.0  0.0  -23.6338   13.645     0.0      27.3082

julia> ptrace(state, 1)
GaussianState for 3 modes.
  symplectic basis: QuadPairBasis
mean: 6-element Vector{Float64}:
  4.0
 -4.0
  0.0
  0.0
  0.0
  0.0
covariance: 6×6 Matrix{Float64}:
 1.0  0.0    0.0       0.0       0.0       0.0
 0.0  1.0    0.0       0.0       0.0       0.0
 0.0  0.0   27.3082    0.0     -13.645   -23.6338
 0.0  0.0    0.0      27.3082  -23.6338   13.645
 0.0  0.0  -13.645   -23.6338   27.3082    0.0
 0.0  0.0  -23.6338   13.645     0.0      27.3082

julia> ptrace(state, [1, 4])
GaussianState for 2 modes.
  symplectic basis: QuadPairBasis
mean: 4-element Vector{Float64}:
  4.0
 -4.0
  0.0
  0.0
covariance: 4×4 Matrix{Float64}:
 1.0  0.0   0.0      0.0
 0.0  1.0   0.0      0.0
 0.0  0.0  27.3082   0.0
 0.0  0.0   0.0     27.3082

Symplectic Analysis

Gabs provides different tools for analyzing symplectic transformations and properties of Gaussian states and operators. Under the hood, the aforementioned types such as GaussianState, GaussianUnitary, and GaussianChannel keep track of symplectic bases, i.e., ordering of bosonic mode operators. To change symplectic bases, simply call changebasis. As an example, consider the phase shift operator, defined by the quadrature transformations

\[\hat{x} \to \cos(\theta) \hat{x} + \sin(\theta) \hat{p}, \qquad \hat{p} \to -\sin(\theta) \hat{x} + \cos(\theta) \hat{p}.\]

The symplectic transformation corresponding to the action of a tensor product of phase shift operators on a bosonic system is dependent on the ordering of the bosonic mode observables, so it is useful to swap symplectic bases. Consider a simple example for a two-mode system:

julia> op = phaseshift(QuadBlockBasis(2), 0.5)
GaussianUnitary for 2 modes.
  symplectic basis: QuadBlockBasis
displacement: 4-element Vector{Float64}:
 0.0
 0.0
 0.0
 0.0
symplectic: 4×4 Matrix{Float64}:
  0.877583   0.0       0.479426  0.0
  0.0        0.877583  0.0       0.479426
 -0.479426   0.0       0.877583  0.0
  0.0       -0.479426  0.0       0.877583

julia> changebasis(QuadPairBasis, op)
GaussianUnitary for 2 modes.
  symplectic basis: QuadPairBasis
displacement: 4-element Vector{Float64}:
 0.0
 0.0
 0.0
 0.0
symplectic: 4×4 Matrix{Float64}:
  0.877583  0.479426   0.0       0.0
 -0.479426  0.877583   0.0       0.0
  0.0       0.0        0.877583  0.479426
  0.0       0.0       -0.479426  0.877583

Various symplectic decompositions are supported in Gabs through the symplectic linear algebra package SymplecticFactorizations.jl. Particularly important ones are the Williamson decomposition (williamson), Bloch-Messiah/Euler decomposition (blochmessiah), and the symplectic polar decomposition (polar):

SymplecticFactorizations.williamson — Function

williamson(state::GaussianState) -> Williamson

Compute the williamson decomposition of the covar field of a GaussianState object and return a Williamson object.

A symplectic matrix S and symplectic spectrum spectrum can be obtained via F.S and F.spectrum.

Iterating the decomposition produces the components S and spectrum.

To compute only the symplectic spectrum of a Gaussian state, call sympspectrum.

source

SymplecticFactorizations.blochmessiah — Function

blochmessiah(state::GaussianUnitary) -> BlochMessiah

Compute the Bloch-Messiah/Euler decomposition of the symplectic field of a GaussianUnitary and return a BlockMessiah object.

The orthogonal symplectic matrices O and Q as well as the singular values values can be obtained via F.O, F.Q, and F.values, respectively.

Iterating the decomposition produces the components O, values, and Q, in that order.

source

SymplecticFactorizations.polar — Function

polar(state::GaussianUnitary) -> Polar

Compute the Polar decomposition of the symplectic field of a GaussianUnitary object and return a Polar object.

O and P can be obtained from the factorization F via F.O and F.P, such that S = O * P. For the symplectic polar decomposition case, O is an orthogonal symplectic matrix and P is a positive-definite symmetric symplectic matrix.

Iterating the decomposition produces the components O and P.

source

Let's see an example with the Williamson decomposition:

julia> using Gabs, LinearAlgebra
julia> state = randstate(QuadBlockBasis(1))GaussianState for 1 mode.
  symplectic basis: QuadBlockBasis
mean: 2-element Vector{Float64}:
 1.1014591716247117
 0.8005045773981577
covariance: 2×2 Matrix{Float64}:
 10.0318    0.264625
  0.264625  0.38551
julia> F = williamson(state)Williamson{Float64, Matrix{Float64}, Vector{Float64}}
S factor:
2×2 Matrix{Float64}:
 0.050104  -2.26837
 0.441952  -0.050104
symplectic spectrum:
1-element Vector{Float64}:
 1.9486696114218136
julia> isapprox(Diagonal(repeat(F.spectrum, 2)), F.S * state.covar * F.S', atol = 1e-12)true
julia> S, spectrum = F; # destructuring via iteration
julia> S == F.S && spectrum == F.spectrumtrue
julia> issymplectic(QuadBlockBasis(1), S, atol = 1e-12)true

In the last line of code, we used the symplectic check issymplectic. In general, we can check if a state or operator is Gaussian with isgaussian.